Yes, all versions of these lights are completely plug and play. There is absolutely no cutting or splicing required.

The paint code for your truck can be found on the vehicle information sticker on the driver-side door jamb. We've attached an image depicting where the paint code is located on the sticker. The paint code can be found at location 13. If you're unsure of your paint code, simply type your vehicle's color.

We use your vehicle's VIN and paint code to match exactly the factory color it came with. We do not offer an option to paint these in a different color than what the truck was equipped with from the factory.

If you select the lights with the OEM Length LED, your lights will automatically come equipped with the start-up sequence. 

If you select the lights with the Full Length LED, you can choose to opt in or out of having the start-up sequence.

The Running Light Only version takes approximately 1 hour to install following our installation video.

The turn signal versions take approximately 1–2 hours to install. An upgrade harness (completely plug and play) is required to be installed for these lights which is what takes a bit longer. We have a full installation video showing how to do the installation.

The price is for a SET of four lights (one for each fender).

If you're upgrading to the version with signals, the required wiring harness to connect to the truck is included.

These are exclusively offered by Boost Auto (we designed and developed the tooling), so we do not offer the lights individually because they will not match any other lights on the market.

Yes! Simply select that you would like to purchase the fender clip kit above and these clips will be included with your order. This kit will include all the fender clips you may need for your truck. 

Yes! These work on dually trucks and use the same installation process. The only difference is that the rear fender liners have some adhesive material on them, so they're a bit more stubborn coming off.

Check out the dynamic pictures shown on the page above for an idea of how the lights will function.

If you choose Running Light Only - Amber LED, the lights will only work as an amber running light.

If you choose Running Light Only - White LED, the lights will only work as a white running light.

If you choose Signal & Running Light, the lights will illuminate as an amber running light and flash as an amber turn signal. Further explained, if you just have the running lights on, the light will be a solid amber strip. If you activate the turn signal while the running lights are on, the solid amber light will turn off, and the amber light will flash. After the signal turns off, the amber light will turn back on. If your running lights are off, the amber signal light will flash like a normal signal.

If you choose Sequential Signal & Running Light, the lights will illuminate as an amber running light and scan as an amber turn signal. Further explained, if you just have the running lights on, the light will be a solid amber strip. If you activate the turn signal while the running lights are on, the solid amber light will turn off, and the amber light will scan. After the signal turns off, the amber light will turn back on. If your running lights are off, the amber signal light will scan like a normal signal.

If you choose Switchback, the lights will illuminate as a white running light, and flash as an amber turn signal. Further explained, if you just have the running lights on, the light will be a solid white strip. If you activate the turn signal while the running lights are on, the solid white light will turn off, and the amber light will flash. After the signal turns off, the white light will turn back on. If your running lights are off, the amber signal light will flash like a normal signal.

If you choose Sequential Switchback, the lights will illuminate as a white running light and scan as an amber turn signal. Further explained, if you just have the running lights on, the light will be a solid white strip. If you activate the turn signal while the running lights are on, the solid white light will turn off, and the amber light will scan. After the signal turns off, the white light will turn back on. If your running lights are off, the amber signal light will scan like a normal signal.

The smoked lens is a smoked lens with a black plastic backing behind it.

The frosted lens is a frosted lens with a white plastic backing behind it.

The factory fender lights are running light only, so included with your purchase is a completely plug-and-play wiring harness. The harness intercepts the front headlight connectors and provides power to the fender lights.

The harness utilizes OEM connectors and is high quality. It is completely wrapped in high-temperature plastic protective tubing and requires no cutting or splicing whatsoever.

Absolutely. All of our products come standard with our 1-year warranty.