Absolutely! Boost Auto offers a retrofit kit for trucks that did not come with cab lights from the factory. Our kit makes the installation as easy as if your truck originally had cab lights. Included within the retrofit kit you will find our easy-to-use roof templates, full wiring harness as well as all clips & necessary hardware for the installation.

Not only do we offer the retrofit kit, but also a detailed step-by-step installation video to go along. Our video will walk you through the full procedure. If you have any questions our support team is always happy to help!

Check out the dynamic pictures found on the Product Features tab for an idea of how the lights will function.

If you choose Running Light Only (Amber) the lights will only work as an amber LED running light.

If you choose Running Light Only (White) the lights will only work as a white LED running light.

If you choose Signal & Running Light the lights will illuminate as an amber running light, and flash as an amber turn signal. Further explained, if you just have the running lights on, the light will be a solid amber strip. If you activate the turn signal while the running lights are on, the solid amber light will turn off on the side you are using your signal for, and the amber light will flash. After the signal turns off the amber light will turn back on. If your running lights are off the amber signal light will flash like a normal signal.

If you choose Sequential Signal & Running Light the lights will illuminate as an amber running light, and scan as an amber turn signal. Further explained, if you just have the running lights on, the light will be a solid amber strip. If you activate the turn signal while the running lights are on, the solid amber light will turn off on the side you are using your signal for, and the amber light will scan. After the signal turns off the amber light will turn back on. If your running lights are off the amber signal light will scan like a normal signal.

If you choose Switchback the lights will illuminate as a white running light, and flash as an amber turn signal. Further explained, if you just have the running lights on, the light will be a solid white strip. If you activate the turn signal while the running lights are on, the solid white light will turn off on the side you are using your signal for, and the amber light will flash. After the signal turns off the white light will turn back on. If your running lights are off the amber signal light will flash like a normal signal.

If you choose Sequential Switchback the lights will illuminate as a white running light, and scan as an amber turn signal. Further explained, if you just have the running lights on, the light will be a solid white strip. If you activate the turn signal while the running lights are on, the solid white light will turn off on the side you are using your signal for, and the amber light will scan. After the signal turns off the white light will turn back on. If your running lights are off the amber signal light will scan like a normal signal.

Absolutely!

Boost Auto's groundbreaking technology allows you to easily add the turn signal feature without the need for additional wires being run to the cab lights. This is achieved with the use of our innovative S-Series Module. For a detailed step-by-step installation video, please reference the link on the installation tab above.

• If your truck was originally equipped with cab lights from factory our cab lights will be completely plug-and-play direct replacement if you select our Running Light Only options. If you opt to add the turn signal function, our easy-to-install S-Series Cab Light Module will get installed under your dash using the factory wiring to send turn signal power to your cab lights.
• If your truck was not originally equipped with cab lights from factory, you will need to use our easy-to-install wire harness that will come with your retrofit kit. Our full installation video will walk you through each procedure step by step, and our support team is always happy to help if you have any questions!

All necessary harnesses and hardware will be supplied with your order based on the options you select.

Our S-Series cab lights have been specifically designed to withstand harsh weather conditions such as rain and snow. Using high-quality closed-cell foam gaskets, our lights eliminate any chance of moisture entering the light or water entering the cabin.

Our cab lights are designed to create a tight seal without needing additional sealant or adhesive. To ensure a weather tight seal, we advise against the use of any sealant or adhesive on our lights.

• If you originally had factory cab lights, you do not need to drill holes in the roof of your truck. Our cab lights are designed to be direct replacements for your OEM lights.
• If you didn't originally have cab lights, we offer a retrofit kit that will come with easy-to-use roof templates to easily allow you to drill the necessary holes. Using our kit, you will not have to dremel squares on the roof (typically how the competition requires you to do), you will simply drill circular holes instead which is a much easier procedure. Our installation video will walk you through the full procedure. If you have any questions our support team is always happy to help! 

Absolutely! Our S-Series Cab lights are designed to match in color temperature and timing with the rest of your Boost Auto upgrades.