Boost Auto Parts offers a full range of replacement upper glass compatible with OEM and aftermarket Ford F150 and F250 F350 Superduty tow mirrors.
All of our glass is equipped with heat, and we also offer optional Blind Spot Monitoring. Please note our glass is NOT equipped with auto-dimming.
Cross References to Ford OEM numbers: FL3Z17K707T & FL3Z17K707R & FL3Z17K707G & FL3Z17K707H & FL3Z17K707AE & FL3Z17K707F & HC3Z17K707A & FL3Z17K707S & FL3Z17K707Q
Link to OEM Installation Video: https://youtu.be/lw9t-WhX4mg
Link to Aftermarket Installation Video: https://youtu.be/SHqufzpBWfI
- Reviews
- Questions
United StatesI installed both the upper and lower mirror on the Driver side - no problem with the lower, but the upper does not appear to fit correctly, it keeps falling out - i get it snapped in only to find the mirror “warped” so it looks like the “mirror house” at a county fair, everything out of focus… still trying to get it to snap in correctly. Did the same thing to the passenger side and it went right back in no problem.
Hi Randy, This mirror house effect is likely due to the tabs on the back of the glass not being fully removed in your OEM application as the video details. Please reach out to our support team at support@boostautoparts.com for assistance. Thanks, -The Boost Auto Team
United StatesOverall they look good had to remove tabs from the back to fit properly
Hi Jesse, As noted in our installation video - when installing onto OEM mirrors you do need to remove the two back tabs. Let us know if you have further questions or concerns. Thanks, -The Boost Auto Team
United StatesHad a difficult time fitting the replacement mirror. Tabs on mirror were getting in the way an the glass is slightly warped.
Hey Christian, Please reach out to our support team at support@boostautoparts.com so we can assist with any issues you're having. Thanks, -The Boost Auto Team
United StatesItem was not exact fit as there were plastic tabs protruding which did not allow for mirror to snap in place. If this is to actually be a replacement part the item should work with no modifications.
Hi James, The glass we offer is made to fit many applications. The plastic tabs on the back need to be removed for your configuration and this is detailed in the installation video on the product page. They remove by simply breaking them off with your hand. Please reach out to our support team if you need assistance. Thanks, -The Boost Auto Team
United StatesThe mirror was easy to install however the image is distorted, almost a double image.
Hi Gerald, The installation video explains that the "U-Shaped Guides" on the back must be removed for installation into OEM mirrors. If you do not remove those guides you will experience the distortion you're referencing. Please reach out to our support team at support@boostautoparts.com so we can resolve this ASAP. Thanks, -The Boost Auto Team