These mirrors are designed to work on 5th Gen 2500/3500 trucks that did not originally come with towing mirrors. These are typically lower-trim trucks like Tradesman.

If you have a higher trim truck that originally came with towing mirrors please reach out to our team for assistance.

· Power Function: If your truck was originally equipped with power mirrors the power function on our mirrors will work properly. Please note our mirrors do not support curbview assist or memory functions. They will still plug and play, but these features will not integrate properly with our mirrors.

· Defrost Function: If your truck was originally equipped with rear defrost the defrost function on our mirrors will work properly.

· Signal Function: If your truck was originally equipped with turn signal, the signal on our mirrors will function properly. If your original mirrors were NOT equipped with signal, this feature must be enabled on your vehicle’s computer which can be easily done with the Boost Auto programming tool and Bypass module (see further info below).

· Puddle Function: If your truck was originally equipped with puddle lamp, the puddle lamp on our mirrors will function properly. If your original mirrors were NOT equipped with puddle, this feature must be enabled on your vehicle’s computer which can be easily done with the Boost Auto programming tool and Bypass module (see further info below).

· Running Light (If Signal & Running Light or Switchback Option is Selected): If your mirrors were originally equipped with running light it will be plug and play. If your mirrors did not originally have running light you must run one wire to a running light power feed (harness included). All wiring internal to the mirror is done; you just need to do the truck-side wiring (instructions included).

· Power Fold: If your truck was originally equipped with power fold the power fold feature on our mirrors will be plug & play.

If your original mirrors were NOT equipped with power fold, you can add it using our wireless upgrade (20-minute install). An installation video can be found on the installation tab above.

If you originally had turn signal you will NOT require a reflash.

If you did not originally have turn signal, you will need to enable this feature on your vehicle’s computer. You can achieve this yourself using our easy to use programming tool and Bypass module which is offered in the options above. Alternatively, you can ask the dealer to enable the feature, however this often costs double the cost of our programming tool so we recommend cutting out the headache and purchasing the tool from us.

All other mirrors on the market require a flash regardless of whether you had signal or not for the mirror to work properly in the flipped position. Boost Auto Parts designed sensors that cannot be found anywhere else that are internal to the mirror which allow the mirrors to be controlled properly in the flipped position without a reflash.

You can enable these features yourself on your vehicle using our easy to use programming tool and bypass module which avoids costly and timely trips to the dealer.

Our programming tool is easy to use following our tutorial video linked in the installation tab above.

Check out the dynamic pictures found on the product page content for an idea of how the lights will function.

Signal Only: The lights will only flash with signal. They will not illuminate as running light.

Signal & Running Light 1.0: The lights will flash as a turn signal. At night when the running lights are activated, the lights will operate at 50% intensity for running light, 100% intensity for turn signal.

Signal & Running Light 2.0: The lights will flash as a turn signal. At night when the running lights are activated, the lights will operate at 100% intensity for running light, 100% intensity for turn signal.

Switchback: The lights will flash as an amber turn signal during the day. At night when the running lights are activated, the lights will operate at 100% intensity in WHITE for running light. When the turn signal is activated, the lights will operate at 100% intensity in AMBER in a flashing pattern until the turn signal is de-activated (at which point it will return to a solid white light).

Yes, the mirrors will adjust properly in the up or down position! Boost Auto designed sensors that cannot be found anywhere else that are internal to the mirror which allow the mirrors to be controlled properly in the flipped position without a reflash.

All other mirrors on the market require a flash regardless of whether you had signal or not for the mirror to work properly in the flipped position.

Yes, you can add the power folding feature to a vehicle not originally equipped with it with our wireless upgrade kit. Our wireless upgrade kit takes 20 minutes per side to install and utilizes all factory electronics. The kit includes a module for each door and the modules use your factory power adjust switch to activate the folding feature. The kit is easy to install and does not require any drilling

Smoked Dotted- Amber at all times

Clear Dotted- Amber at all times

Smoked Strip- Amber if signal only or signal & running light, color changing (white running light, amber signal) if switchback

Clear Strip- Amber if signal only or signal & running light, color changing (white running light, amber signal) if switchback

The puddle light (which shines down towards the ground when you unlock the truck at night) is white when illuminated.

If you select the power fold option they will be equipped with power.

No, the harness is included in the price and we install it.

No, you will not! We install a temperature sensor in all of the mirrors prior to shipping them to you.

Ram does offer a support bracket to support the additional weight of towing mirrors. If you did not originally have towing mirrors, your truck will not be equipped with these brackets.

Most customers find that our mirrors do not require them, however in order to reduce the amount of vibration on the mirrors some customers do opt to install the support brackets. The support brackets do NOT come with the purchase of the mirrors as most customers don't install them.

If you wish to purchase them, you can purchase them from your local dealer along with the supplied hardware by asking for OEM #'s 68078242AA 68078243AA 6508709AA x6 6507161AA x6

Blindspot Monitoring: Offered for trucks that were equipped with Blind Spot Monitoring from the factory

Power Convex (Small) Glass: Not Equipped

Cameras: Not Equipped

Rear-Facing Reverse Spotlights: Not Equipped

These mirrors are not offered with any of the above features except blindspot monitoring. The mirrors are designed as an upgrade for lower trim 2500/3500 trucks that didn't originally have towing mirrors. Lower-trim trucks should not have any of the features above. If you have any of these features please get in touch with our team for assistance.

There is not currently an upgrade path to add these features to trucks that didn't originally have them, so we are not offering them at this time.