Modifying door harnesses involves adding the missing wires to your door harness to achieve plug and play functionality. In addition to the modify door harness kit, 2014 trucks require the RZY harness installation.

Hardwiring involves running loose wires through the door boot to the fuse box &/or BCM to get the mirrors fully functional. We provide instructions and a video, and this is the preferred method for most with 2014 trucks.

Swapping door harnesses involves purchasing complete new door harnesses from a dealer ($200+) to achieve plug and play functionality. 2014 trucks also require the RZY harness.

The only features that will be 100% plug and play are the ones that your original mirrors were equipped with.

Power fold is plug and play if you originally had it. If you didn't have it please see the question below this to understand the scope of adding it.

If you choose to modify your door harness or swap door harnesses everything will be plug and play after doing that and the RZY harness. If you choose to hardwire you will need to wire in any functions (cargo, signal, running light) that the truck wasn't originally equipped with following our directions. We have very thorough instructions and videos provided with purchase that make installation a breeze.

Please note memory, seat recall, and curbview assist are only supported on the power fold version. Non-Powerfold mirrors are NOT supported with memory.

The paint code for your truck can be found on the service parts identification sticker in the glove box. We've attached an image depicting where the paint code is located on the sticker. The paint code can be found at location 16. If you're unsure of your paint code, simply type your vehicle's color.

• If you select the “Paintable” option, you will receive our paintable caps, which are non-textured, so they are fairly ready for you to paint them. They will not match any vehicle straight out of the box, paint is always required.
• If you select the “Painted” option, you will receive the caps painted from us with no additional work needed on your end. We use your vehicle's VIN and paint code to match it exactly to its factory color.

We use your vehicle's VIN and paint code to match exactly the factory color it came with. We do not offer an option to paint these in a different color than what the truck was equipped with from the factory.

Our exclusive Start-Up Sequence is a unique light function that activates anytime the parking lights of your truck are initially turned on. We've included a dynamic image depicting the Start-Up Sequence on our lights.

Please note, the Start-Up Sequence is currently offered on all light functions except Signal Only or Sequential Signal Only.

It's very easy to do and it takes about 30 minutes, however, the RZY harness is required on 2014 trucks and takes a few hours to install.

No trucks require BCM recalibrations with Boost Auto Parts mirrors.

Check out the dynamic pictures found on the product page content for an idea of how the lights will function.

Signal Only: The lights will only flash with signal. They will not illuminate as running light.

Signal & Running Light 1.0: The lights will flash as a turn signal. At night when the running lights are activated, the lights will operate at 50% intensity for running light, 100% intensity for turn signal.

Signal & Running Light 2.0: The lights will flash as a turn signal. At night when the running lights are activated, the lights will operate at 100% intensity for running light, 100% intensity for turn signal.

Switchback: The lights will flash as an amber turn signal during the day. At night when the running lights are activated, the lights will operate at 100% intensity in WHITE for running light. When the turn signal is activated, the lights will operate at 100% intensity in AMBER in a flashing pattern until the turn signal is de-activated (at which point it will return to a solid white light).

Smoked Dotted (Amber LED)- Amber at all times

Amber Dotted (Amber LED)- Amber at all times

Smoked Strip- Amber if signal only or signal & running light, color changing (white running light, amber signal) if switchback

Clear Strip- Amber if signal only or signal & running light, color changing (white running light, amber signal) if switchback

If your original mirrors were power folding then the feature will be plug and play.

If you did not originally have power folding mirrors you can add them, but you will need to purchase a new power folding switch (we offer the switch as an option). You must swap the switch if you want the power fold feature to work properly.

Link to overall power fold tow mirror install video: https://www.youtube.com/watch?v=5KSFrs96t7g

No, the harness is included in the price and installed into the mirrors before they are shipped to you.

The RZY harness is required for all 2014 trucks. We have a full installation video, but most customers choose to hardwire their mirrors for 2014 trucks.

Navigate to the Product Details tab to see the difference; it's night and day! If you have tint on your truck the high output spot light will make the world of difference.

Even if you don't have tint, the high output spot light is extremely convenient!

We've included a graphic below depicting the difference in brightness between Low Output Flood Lights and High Output Spotlights